Skip to content

AIR OPERATED SELF-PRIMING DOUBLE DIAPHRAGM PUMPS for DIESEL FUEL, OILS and WASTE OILS AIR55

BARE PUMP

Mod. AIR55/N
Air operated self-priming double diaphragm pump
(only the pump - no accessories)

Optional:
Mod. AIR20-55/ST
Wall fixing base

with steel painted base,

 

 

Mod. AIR55
Air operated self-priming double diaphragm pump
(with steel painted base, hose connectors and filter)

COMPLETE

Mod.AIR55/C
Air operated self-priming double diaphragm pump complete
• 2.5m suction hose with filter
• 2.5m discharge hose
• manual nozzle
• steel painted base

for 200L and 1000L IBC drums

Mod.AIR55/C/F
Air operated self-priming double diaphragm pump complete
for 200L and 1000L IBC drums
• rigid suction pipe and filter
• 2”M fixing nut, 2”F-56x4M and
2”F-70x6M adapters
• 2.5m discharge hose and manual nozzle

Flow rate with DIESEL FUEL: 30LPM
Flow rate with Oils or waste oils: approx. 10LPM
Different flow rates based on inlet air pressure, air consumption Nl/min. and fluid densities

TECHNICAL DATA AND CONSUMPTION

CASING Aluminium, DIAPHRAGM Hytrel+Ptfe, BALLS Ptfe, SEATS Aluminium, GASKET Ptfe

TECHNICAL DATA

FLUID CONNECTIONS: 1/2” BSP
AIR CONNNECTION: 1/4’’ BSP
MAX FLOW RATE: 55 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 6 m
MAX SUCTION LIFT WET: 9,8 m

MAX SOLID PASSING: 3.5 mm
NOISE LEVEL: 68dB
MAX VISCOSITY: 20.000 cps
ATEX zone 2: EX II 3/3 GD c IIB T135°C
WEIGHT: 5kg
MAX TEMPERATURE: 90°C
MIN TEMPERATURE: -20°C

The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary
according to the construction material. Hose connectors, hoses, nozzles, flow meters and other accessories reduce the nominal flow rate
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
Pumps must be used in vertical position only.

Scopri le novità 2019