Skip to content

SELF-PRIMING ELECTRIC 220V PUMPS NOT REVERSIBLE IMPELLER for OIL, WATER-MIXABLE OIL and WASTE OIL -15 L/Min

BARE PUMP

Mod. 220V/OIL/N
220V Elesctric pump (15 L/Min)
for oil and waste oil with 1.30m electric cable, hose connectors, filter and fixing base
(DO NOT USE FOR DIESEL)

Mod. 220V/OEM/N
220V Elesctric pump (15 L/Min)
For water-mixable oil with 1.30m electric cable, INOX hose connectors, filter and fixing base
(DO NOT USE FOR DIESEL)

 

COMPLETE

Mod. 220V/OIL/C
220V Elesctric pump complete (15 L/Min)
for oil and waste oil
• 2.5m suction hose and filter
• 2.5m discherge hose with manual nozzle
• fixing base
(DO NOT USE FOR DIESEL)

 

Mod. 220V/OEM/C
220V Elesctric pump complete (15 L/Min)
For water-mixable oil
• 2.5m suction hose and filter
• 2.5m discherge hose with manual nozzle
• fixing base
(DO NOT USE FOR DIESEL)

 

Mod. 220V/OIL/GIR
Spare rubber impeller

 

TECHNICAL DATA

Volt

Max suction w/valve

HP A Watt rpm IP In/Out

Fluid oil flow rate

Medium density oil flow rate

High density oil flow rate

220 2,5m 0,75 3,8 550 2760 55 1/2"BSP 10l/min 5l/min 2l/min

IP65 PROTECTION - The rubber impeller can tolerate impurities (max 5 mm), but not abrasive particles.
Motor protection fuse - The pump can be installed in any position.
Operating temperature: min. -10°C / max. 60°C. Do not use for gasoline, corrosive chemical products and alimentar fluids.
The pump must be switched off within 2-3 minutes if the motor is running and the gun is closed.
Duty cicle: max 20 min.

 

Scopri le novità 2019