BARE PUMP
Mod. AIR20/N
Air operated self-priming double diaphragm pump
(only the pump - no accessories)
Optional:
Mod. AIR20-55/ST
Wall fixing base
with steel painted base,
Mod. AIR20
Air operated self-priming double diaphragm pump
(with steel painted base, hose connectors and filter)
COMPLETE
Mod.AIR20/C
Air operated self-priming double diaphragm pump complete
• 2.5m suction hose with filter
• 2.5m discharge hose
• manual nozzle
• steel painted base
for 200L and 1000L IBC drums
Mod.AIR20/C/F
Air operated self-priming double diaphragm pump complete for 200L
and 1000L IBC drums
• rigid suction pipe and filter
• 2”M fixing nut, 2”F-56x4M and 2”F-70x6M adapters
• 2.5m discharge hose and manual nozzle
Flow rate with DIESEL FUEL: 15LPM
Flow rate with Oils or waste oils: approx. 5LPM
Different flow rates based on inlet air pressure, air consumption Nl/min. and fluid densities
PERFORMANCE AND AIR CONSUMPTION
CASING Pom, DIAPHRAGM Hytrel+Ptfe, BALLS Ptfe, SEATS Pom, GASKET Ptfe
TECHNICAL DATA
FLUID CONNECTIONS: 3/8” BSP
AIR CONNNECTION: 6mm
MAX FLOW RATE: 20 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 6 m
MAX SUCTION LIFT WET: 9,8 m
MAX SOLID PASSING: 3 mm
NOISE LEVEL: 65dB
DISPLACEMENT FOR CYCLE: 30 cc
MAX VISCOSITY: 12.000 cps
ATEX zone 2: EX II 3/3 GD c IIB T135°C
WEIGHT: 1.1kg
MAX TEMPERATURE: 95°C
MIN TEMPERATURE: -5°C
The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary
according to the construction material. Hose connectors, hoses, nozzles, flow meters and other accessories reduce the nominal flow rate
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
Pumps must be used in vertical position only..