Skip to content

AIR OPERATED SELF-PRIMING DOUBLE DIAPHRAGM PUMPS for DIESEL FUEL, OILS and WASTE OILS AIR 110

BARE PUMP

Mod. AIR110/N
Air operated self-priming double diaphragm pump
(only the pump - no accessories)

Optional:
Mod. AIR110-170/ST
Wall fixing base

with steel painted base

 

 

Mod. AIR110
Air operated self-priming double diaphragm pump
(with steel painted base, hose connectors and filter)

Flow rate with DIESEL FUEL: 40LPM
Flow rate with Oils or waste oils: approx. 15LPM
Different flow rates based on inlet air pressure, air consumption Nl/min. and fluid densities

PERFORMANCE AND AIR CONSUMPTION

CASING Aluminium, DIAPHRAGM Hytrel+Ptfe, BALLS Ptfe, SEATS Aluminium, GASKET Ptfe

TECHNICAL DATA

FLUID CONNECTIONS: 3/4” BSP
AIR CONNNECTION: 3/8” BSP
MAX FLOW RATE: 110 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 6 m
MAX SUCTION LIFT WET: 9,8 m

MAX SOLID PASSING: 3.5 mm
NOISE LEVEL: 72dB
MAX VISCOSITY: 25.000 cps
ATEX zone 2: EX II 3/3 GD c IIB T135°C
WEIGHT: 7kg
MAX TEMPERATURE: 90°C MIN
TEMPERATURE: -20°C

The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according
to the construction material. Hose connectors, hoses, nozzles, flow meters and other accessories reduce the nominal flow rate
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
Pumps must be used in vertical position only.

× Contattaci